Faux Flowers Bridal Bouquet

diy-faux-flowers-bridal-bouquet-pin-2
One last wedding DIY before I switch gears into holiday crafting!

This is a more involved project, and the longest video I have made so far! But really it is a culmination of several other small projects into one large one! To preface- I have nothing personal against real flowers! It’s just that for my own bridal bouquet, I wanted to be 100% in control of the result, and I wanted to have one less thing to worry about the day-of!

Here are some perks to having a DIY faux bouquet:

  • You are in control of how it looks, down to the tiniest detail.
  • It is made weeks or months in advance, so one less thing to stress about on your special day.
  • Using upcycled and affordable materials is much more budget friendly- weddings are already expensive! The materials for my bouquet came to about $15 altogether!
  • It is durable- lasting through scorching heat, endless photos, hours of dancing, and bouquet tossing! Plus, you get to keep it afterwards to display at home!

So now that I have you convinced:

You will need:

Styrofoam ball– 3″-4″ is a good size, keep in mind it will be much larger once flowers are added! I found this at my local dollar store for $1.25
Toilet paper rolls– Free! Or, you can use paper towel roll, or gift wrap roll.
Felt– about $0.30 a sheet at a craft store (like Michaels’).
Ribbon– Great chance to upcycle old gift ribbon, or use ribbon from the thrift store. In mine I also layered in strips of fabric from my MIL’s wedding dress.
Flowers / stems / foliage– You can use any plastic or silk flowers of your choice, or better yet, make your own! I used my coffee filter flowers for the bulk of it, filling in the gaps with cupcake liner flowers, as well as ribbon roses for accents! Leaves and other green elements are from the dollar store.
Your tools– hot glue gun and scissors!

Ready to go!

Start by constructing you handle: Cut two toilet paper rolls length-wise to open them up, and glue them end-to-end to create one extra-long roll. Glue your roll closed, adjusting the width by rolling it into itself. We will be adding a few more layers on top, so the result will be thicker.

Close one end of your roll by gluing a piece of cardboard, or leftover toilet paper roll, to cover it completely.

To attach the handle to the styrofoam ball, score the area using the handle, then use your scissors to dig up and deepen that score line, so that the handle can slide in about 1/2″. Glue liberally to create a secure hold.

Cover your handle with felt to smooth over any seams, and glue the bottom for a clean finish.

Wrap your handle with your choice of fabric or ribbon. Add any elements you choose to personalize your bouquet handle- interlacing ribbon in different colors, bling like pearls or rhinestones, lace or bows- make it your own!

Start adding your flower stems to the styrofoam ball. Start with the largest flowers, and work your way down to smaller elements like leaves or small flowers. If your ball is dense, the stems should hold on their own, but you can always add a bit of glue to make it more secure. Distribute your flowers evenly around the ball, stepping back and rotating your bouquet frequently to view it from all angles.

Finish your bouquet by adding flowers or leaves to camouflage the connection between the ball and the handle.

Sit back to admire your work, and get ready for “You made it?! No way!!” 🙂

faux-flowers-bridal-bouquet-pin-1

Ribbon leaves- the easy way!

So now you know how to make flowers out of coffee filters, cupcake liners, and even a few ways with ribbon. To help your flowers feel more complete, you can finish them off with a few green ribbon leaves at the base, here’s how!

Ribbon leaves cover
You will need:

Green ribbon
Scissors
Candle with matches / lighter
Glue to attach to flower

Start by cutting your ribbon into strips between 3-4 inches in length. The length of these strips will determine how much (if at all) your leaves will peek beyond the flower petals. To better estimate the length needed for the size of the flower, I like to measure from the base of my flower to the tip of the outermost petal, and add a little bit more. All your ribbon strips don’t have to be the same exact length, so don’t get too caught up with measuring!

ribbon cut shapes 1

Once you have your ribbon strips cut out (image 1), you can trim the edges to create a pointed edge (image 2). To make this process easier and more symmetrical, you can fold your strip in half and cut both sides at once.

I prefer to use a lit tealight candle to singe the edges of the ribbon pieces, but you can also use a lighter if you are comfortable. Since we are dealing with open flame here, use your common sense and be safe and careful. I have burned my fingers more than once doing this! So feel free to use a pair of long tweezers or pliers to have a comfortable hold on your ribbon away from the flame.

Gently singe off the ribbon edges near the flame, and if you like round out any edges and add curve to your leaves by briefly holding your ribbon a few inches above the candle.

Easy! Now attach your ribbon leaves to the base of your flower using your choice of glue. Hot glue works great in this case.

Adding leaves helps give a more complete look to my flowers, and they look a little more polished and “finished”. I recommend adding leaves in groups of 3 or 5, as odd number groupings look best. For bonus points, use watercolor or fabric paint to add darker or lighter areas to your leaves!

Ribbon leaves pin

Ribbon Roses

Welcome to week 3 of “April Flowers”! This week I will share with you how you can make roses out of ribbon, and it’s really not as hard as it looks!

Ribbon Roses pin 1

You will need:

Satin ribbon ***
Scissors
Hot glue gun
Stick / skewer
Candle + lighter

***Alternative: This same technique also works with synthetic fabric, think polyester and lining satin, or sheer organza. Using fabric may be a more economic option if you are planning to make a lot of these! I found a big roll of thick ribbon on clearance at Michaels for $1, so keep your eyes open for bargains!

ribbon rose measure pieces

Start by measuring your ribbon and cutting out your pieces. You will need 10 pieces that are 1.5 inches wide, and 5 pieces that are 2 inches wide.

ribbon rose round corners

Round the corners of your rectangular pieces into “squoval” shapes.

ribbon rose candle

VERY CAREFULLY singe the edges of your ribbon next to a candle flame. Use the heat of the candle to curve the petals slightly so they are a bit convex.

ribbon rose edges finished

This is what your rose petals will look like at this stage. Put them aside and start with one small petal.

ribon rose glue petal 1

Put a strip of hot glue in the bottom corner of your petal, and fold it down.

ribbon rose glue petal 2

Lay down another strip of hot glue and roll in your petal corner to form a bud.

ribbon rose bud

Glue the next 4 small petals around this bud, one at a time. As you glue, make sure to slightly stagger your petals so they are dispersed evenly all the way around.

ribbon rose insert stick

After five petals, glue in your stick. This is optional- you can continue without the stick if you are planning to use this ribbon rose as a hair accessory!

ribbon rose layer 2

Continue to glue down small petals 6 through 10, staggering them around the bud, focusing the glue at the bottom of the petals.

ribbon rose layer 3

Glue down the last 5 large petals. As you glue, do not press them down as much as before, allowing more gaps between petal layers.

Ribbon Roses- pin 2

And there you have it! Your own rose made of ribbon!

These are beautiful in floral centerpieces and as decor accents, and can be made without the stick for fashion accessories. If you have a wedding or event coming up, consider making some of these to incorporate into your decoration or bouquets!

Here is a quick summary, feel free to pin or save this image for quick reference!

Ribbon Roses- instructional pin

I hope you enjoyed this weeks’ DIY flower! 🙂 There is one more week left, and one more DIY flower project coming your way! If you would like to vote on the next flower project I make, keep your eyes on my Instagram feed (@Throneandthimble) for your chance to decide!

Cupcake Liner Flowers- 2 minute DIY

Cupcake Liners Flowers- bouquet pin 2

Keeping with the theme from last week of making flowers from kitchen pantry items (see my coffee filter flowers here) this week I am making flowers out of cupcake liners!

These are very economical, I got a pack of 80 cupcake liners at the dollar store for $1, and since you only need 3 liners per flower, that’s like… 26 flowers for just $1!!

supplies 1

You will need:
– Cupcake liners
– Scissors
– Hot glue gun
– Skewer or stick

*** QUICK TIP: I cut up a wire hanger into 4 pieces to be used as stems. This makes the flowers bendable to different angles, and is a great upcycling opportunity! ***

3 cupcake liners stacked

Grab 3 cupcake liners, stack them together, and flatten them out.

cupcake liners taco fold

Fold your liners in half like a taco.

cupcake liners quarter fold

Fold your liners in half again, into a quarter circle shape.

cupcake liners petals cut

Cut out your petals. You can keep them rounded, or spiky, or scalloped, or really wide, or really skinny- the possibilities are endless! And each different type of petal shape results in a different looking flower.

cupcake liners petals cut opened

Open up your folded cupcake liners. Take a moment to fix any petals if needed.

cupcake liners on stick

Push your stick through the centre of all cupcake liners. Now you are ready to start gluing!

cupcake liners on stick glued 1

Put hot glue in the centre of the cupcake liner, and bunch it together at the tip of the stick. Your petals may get a bit bunched at first, but that is ok, that is the centre of your flower, so will naturally look more dense.

cupcake liners on stick glued 2

Keep gluing your liners one at a time, making sure the glue comes in contact with both the previous liner and the stick itself.

cupcake liners flower round petals

You can add silk leaves, or green ribbon along the base of the flower. Play around with different petal shapes for a different result!

cupcake liners flower spiky petals

These are fantastic to use in centrepieces for events and weddings. I have experimented and tried coloring it with different methods, but since the liners are water-repellant I have not yet found a method that works! If you have any suggestions, please leave them in the comments below!

Cupcake Liners Flowers- bouquet pin 3

You can use different colored liners- pastel ones look great! Patterned liners are fun too, but not as realistic looking.

Here’s a full recap of all the steps, feel free to pin it and save it for your next event!

Cupcake Liner Flowers- instructional pin

 

Looped and Knotted Ribbon Flower

ribbon flower diy

Here is the first in my DIY flower series! We are going to kick things off with this fun loopy ribbon flower, which is probably the easiest ribbon flower I have attempted so far. You can get completely different result depending on the type of ribbon you use for your flower: thicker ribbon, sheer ribbon, even printed ribbon, will result in completely different looking ribbon flowers!

Here is the video tutorial I made, which explains all the steps in depth:

You will need:

Ribbon
Needle and thread
Ruler
Skewer / chopstick / wire
Scissors
Hot glue gun

Step 1: Decide how big you want your flower to be. I wanted a medium flower, so I cut my ribbon into 10 cm long pieces. I also made a slightly bigger flower using 12 cm long pieces. The longer your ribbon sections, the floppier your ribbon flower will be!

Step 2: Cut 50 pieces of ribbon, all the same length that you decided.

pieces of ribbon

Step 3: Knot your ribbon at the centre of each piece. Don’t worry too much about the ribbon flipping between the shiny and dull side, as long as your knot is tight and centred, it will look great at the end!

knotted ribbon

Step 4: Thread your needle and get ready to sew- start with the bottom of the flower, which is 30 pieces. Fold each piece in half, putting the raw edges of the ribbon together. Sew along the edge, 1 ‘in-n-out’ stitch per piece is enough.

Step 5: Once all 30 pieces are sewn together, gather the pieces together by pulling on the thread from both sides, and knot the thread tightly together to hold in place. Cut your thread, and put your bottom flower aside.

Step 6: Repeat steps 4 and 5 for the remaining 20 pieces of ribbon. This is your top flower.

ribbon flower parts2

Step 7: Glue time! Start by hot gluing your skewer to the centre of the bottom flower. Then, glue the centre of the top flower to the centre of the bottom flower, layering them together. give it a good fluff and your flower is complete!

ribbon flower 1

Variations:

Instead of a skewer you can also use floral wire, which allows the stem of the flower to be re-positionable. If you are using a wooden stick / skewer / chopstick you can also paint it green to blend in better as a “stem”.

This would look awesome with sheer or organza ribbon, and could come out looking fun and whimsical if you use printed ribbon.

You can use fewer pieces of ribbon for a floppier look. I like my flowers extra fluffy and dense so  I used 50 pieces of ribbon per flower.

For the next few weeks there will be lots more DIY spring flowers coming your way, including some other ribbon flowers variations, so stay tuned for more!

Ribbon Flower DIY (2)

Smash your Stash

smash title

As I was putting away all my craft supplies after our move, I got to thinking- I have A LOT of craft supplies! I have already briefly addressed my habit of accumulating an unnecessary amount of crafting supplies in my previous post, so I got to thinking. What if… for a whole year I didn’t buy any more crafting supplies, and only used what I had? Crazy and extreme, I know! But I think it would be a good idea for a couple of reasons:

1) It will make space for more…. Just kidding! But it would help if it took up less space. So if I use it up without replenishing = more space!

2) It will challenge me to create within restrictions. From my experience, that is usually when I come up with the best and most creative ideas.

3) It will reinforce my “consume less” attitude that I already apply to other aspects of my life.

So- will it be difficult? You bet! But I am willing to give it a try. I know 1 year is a long time, but I figured with the size of my stash it will definitely last me that long. Also, a caveat- gifts don’t count! (Haha you knew there had to be a loop hole!).

Feel free to tag along with me on this challenge, or share your experiences of working from your stash!